Digital Product Passport for furniture: kitchen industry calls for delay
The German kitchen furniture association wants ecodesign requirements and the Digital Product Passport for furniture to be introduced step by step. What lies behind the demand, which timetable applies today and why short transition periods call for early preparation.
Oskar CornelissenCo-Founder & CLO, RegulyPublished 18 Nov 2026 · 7 min read
Contents
The German kitchen furniture association VdDK (Verband der Deutschen Küchenmöbelindustrie) wants the timetable of the EU Ecodesign for Sustainable Products Regulation (ESPR) for furniture to be stretched. Requirements and the Digital Product Passport should be phased in, and the delegated act should only be adopted once robust data and agreed test methods are available. The association explicitly supports the regulation’s goals. Its criticism is aimed at the deadlines. This article puts the demand into context, sets out the current legal framework and explains why furniture manufacturers should start now, whatever the outcome.
- Who
- German kitchen furniture association (VdDK)
- Occasion
- General meeting in Rödinghausen, November 2026
- Legal framework
- Ecodesign Regulation (ESPR), Regulation (EU) 2024/1781
- Planned
- Delegated act for furniture, adoption scheduled for 2028
- Transition
- As a rule at least 18 months until application
- Demand
- Phased introduction, act only once data and methods are robust
- Addressed to
- German government and EU level
- Legal status today
- No product passport obligation for furniture yet
What the association is asking for
VdDK managing director Jan Kurth presented the position at the association’s general meeting, hosted by Ballerina-Küchen in Rödinghausen. The association backs the sustainability goals of the ESPR but warns against overburdening companies with complex requirements and tight deadlines. The demand is addressed both to the German government and to the EU institutions.
- Phased introduction: ecodesign requirements and the Digital Product Passport for furniture should be introduced in stages, not in one step.
- Methods first, then the act: the delegated act planned for 2028 should only be adopted once robust data and harmonised methods are available.
- Durability and reparability: according to the association, there are no uniform test methods for either criterion yet. Without them, requirements can neither be met nor checked in a comparable way.
- Longer transition: the association considers the 18 months between adoption and application far too short.
The economic situation adds to the pressure. Weak consumer demand and a decline in residential construction weigh on the sector. From January to August 2026, the 43 German kitchen furniture manufacturers with at least 50 employees generated revenue of around 3.7 billion euros, 0.5 percent more than in the same period of the previous year. The industry sees little room for additional projects on short deadlines.
What the Ecodesign Regulation provides
The ESPR has applied since July 2024. It is a framework: which requirements apply to a product group and which data belong in its product passport is only set by a delegated act of the Commission. Under Article 4 ESPR, its requirements as a rule apply no earlier than 18 months after entry into force. A shorter period is only allowed in justified cases. Longer transition periods are possible if the Commission sets them in the act.
Furniture is one of the product groups the Commission prioritised in its first ESPR working plan. Adoption of the act is scheduled for 2028. Adding the usual transition period, the requirements would become binding in 2029 or 2030 at the earliest. What exactly they will be is still open. Under Article 5 ESPR, they may cover durability, reparability, availability of spare parts, recycled content, recyclability and substances of concern, among others.
July 2024
ESPR enters into force
Regulation (EU) 2024/1781 creates the framework for ecodesign requirements and the Digital Product Passport.
April 2025
First ESPR working plan
The Commission adds furniture to the list of priority product groups.
Nov 2026
VdDK demand
The kitchen furniture industry calls for a phased introduction and a longer transition.
2028 (planned)
Delegated act for furniture
The Commission sets the requirements and the content of the product passport for furniture.
from around 2029/2030
Application
No earlier than 18 months after the act enters into force, the requirements apply to furniture newly placed on the market.
Why furniture is particularly demanding
A piece of furniture is made of many components from many suppliers: wood-based panels, edging, fittings, coatings, adhesives, worktops, glass and metal. Kitchens add a high number of variants. Almost every kitchen is planned individually, with its own dimensions, fronts and features. Whether the passport has to be created per model, per batch or per individual item will be decided by the delegated act. For data management, that makes a big difference.
The criteria themselves are also hard to pin down. How long does a kitchen cabinet last, and under what load? When is a piece of furniture reparable if the hinges can be replaced but the carcass panel cannot? As long as there are no harmonised standards, it remains unclear how manufacturers substantiate their claims and how authorities check them. This is where the association’s criticism comes in.
Short transition periods call for early preparation
Whether the demand succeeds is open. For planning within companies, this changes less than it seems. Even if the act is postponed or the transition period is extended, the groundwork for the product passport stays the same, and it takes longer than 18 months if you only start once the act is adopted.
- Supplier data needs lead time. Information on materials, origin, substances and recycled content has to be requested from suppliers, checked and secured in contracts. This often takes several rounds.
- Master data has to fit. Bills of materials and the item and variant logic in ERP and PIM must be set up so that product passports can be generated automatically. Starting after the act means rebuilding under time pressure.
- Define identifiers and data carriers. The passport needs unique product identifiers and a data carrier such as a QR code on the product. Harmonised standards for this already exist and can guide companies today.
- Collect evidence. Proof of durability, spare parts and repair does not appear overnight. Existing test reports and quality labels are a good starting point.
- Clarify responsibilities. Product development, purchasing, IT, quality and sales have to work together. Who is responsible and who approves data should be settled before the obligation applies.
Starting early also brings influence. Companies that know their data can contribute concrete experience to the Commission’s consultations and to standardisation. And much of the data is useful already today: for tenders, sustainability reports, retailer requests and communication with end customers.
What furniture manufacturers should do now
- Follow the process. Monitor the Commission’s preparatory work, consultations and standardisation requests on durability and reparability, including through industry associations.
- Take stock. Check which product and material data already exist, where they are held and in what quality.
- Involve suppliers early. Announce data requirements and include them in new supply contracts.
- Run a pilot. Set up a trial product passport for one product line to find gaps in the data model.
- Assign internal ownership. Name a person or a small team to steer the preparation.
Talk it through in person
Prepare the product passport before the clock starts
Reguly generates digital product passports from your product data, assigns GS1-compliant QR codes and keeps every change traceable. Talk to us about how to build the data foundation for your furniture today.
Book a callWritten by
Oskar CornelissenCo-Founder & CLO, Reguly



